Make Your Own Moulds Copyflex Liquid Silicone 500g – Mould Making By Silicone Plastique

This product consists of 2 parts: 250g white and 250g orange.

CopyFlex is a food grade, liquid silicone rubber that was designed specifically for mould making.

Unlike many liquid silicones that have complicated mix ratios and very thick consistencies, CopyFlex is easy to use because equal amounts of both catalyst and base are combined to produce a silky smooth, low viscosity liquid silicone rubber that reproduces the finest details.

A 1:1 mix ratio is very convenient for large projects and also enables mould makers to easily pour moulds that may weigh as little as two ounces.

Conventional liquid silicone mould making rubber often has a cure time of 24 to 36 hours which is very long when compared to CopyFlex which will cure in five hours at 21.1degrees Celcius (70 degrees F).

To held the item in place that you are making a mould of, try using Achor-Dit and if you are making a mould made of something porous such as wood, try using Seal-Dit.

For mixing instructions – See more detailed information here

The shore strength for set CopyFlex is 35.